The microscope is supported by a single round pillar with three folding legs. The stage and body tube support is attached to the top of the pillar.
The microscope support limb can be rotated to place the microscope in the aquatic position.
At the base of the main pillar there is a hole for the mirror mounting pin.
The gimbal for the single-sided mirror is soldered to an internally threaded pin. Parabolic mirror dia=2.5cm.
The mirror pin inserts into the hole and is secured by a silver screw.
The stage has a central hole and two smaller holes in the back for spring clips. 4.7x3.5cm